ALITOVE DC 24V 15A 360W Power Supply Universal Regulated Switching Transformer Adapter LED Driver 110V/220V AC Input for LED Strip CCTV Radio
$23.99
Price: $23.99
(as of Jan 03, 2025 10:40:16 UTC – Details)
Product Description
Parameter
Input: AC 100V~120V / 200V~260V 50/60HzOutput Voltage : DC 24V ( ±10% adjustable, 21.6V~26.4V)Output Current: 15A maxOutput Wattage: 360W maxFix Screw Hole Diameter: 2.5mm (0.1inch)Working temperature: -10℃ ~50℃ （-50 ℉ ~ 122℉）Storage temperature: -20℃ ~ 60℃ （-68 ℉ ~ 140℉）Environmental humidity: 10-95%Safety Compliance: FCC / CE /Rohs
Kindly note
We suggest the max use of power should be no more than 80% of the full loads, otherwise,the power supply’s spanlife will be shortened. We recommend you to use this 24V 15A 360W power supply to power devices less than 288W.110V/220V must be selected by switch before using to avoid damaging. Please change the switch to 110V for USA/CA and 220V for EUR.
Package included
1 x 24V 15A Power Supply (Power cord is NOT included.)
Superior Safety
Built-in safeguards to protect against over voltage, over current, overheat, short-circuit, which will provide ultimate protection for you and your devices.
Intelligent Temp control
It comes with built-in cooling fan and temperature detector. Cooling fan will automatically run when the inner temperature reaches 113°F (45℃), which makes heat dissipation more efficient and silent.
±10% Voltage Adjustment
The output voltage can be regulated by ±10%, from 21.6V to 26.4V, which greatly expand its application range. It can supply with any current ( less than 15A) your device draws, such as 10A, 15A.
Three Output Channels
With three independent output channels, it can power more devices. The maximum output of each channel can reach 15A 360W. Total output power of the three channels is 15A 360W.
Stable Output
Built-in advanced synchronous rectifier smart chip and EMI filter, convert fluctuating voltage to stable voltage, effectively reduce electromagnetic interference.
Warning!
110V/220V must be selected by switch before using to avoid damaging. Please change the switch to 110V for USA/CA and 220V for EUR.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.5 out of 5 stars
32
4.0 out of 5 stars
13
4.8 out of 5 stars
27
4.6 out of 5 stars
22
4.4 out of 5 stars
1,073
4.4 out of 5 stars
1,073
Price
$38.99$38.99 $9.99$9.99
— $45.99$45.99 $22.99$22.99 $44.99$44.99
Output Amps
10A 1.5A 2.5A 15A 10A 20A
Output Volts
24V DC 24V DC 24V DC 24V DC 24V DC 24V DC
Output Watts
240W 36W 60W 360W 240W 480W
Input Volts
100~240V AC 100~240V AC 100~240V AC 110V/220V AC 110V/220V AC 110V/220V AC
Output Port
Barrel Connector Barrel Connector Barrel Connector Terminal Pole Terminal screw Terminal screw
Output Channel
1 1 1 1 3 3
With Power Cord
✓
✓
✓
✓
X X
Input: 110V/220V AC; Output: DC 24V 15A max. Output voltage is adjustable 10%. Three sets of output Channel.
Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
Voltage consistency: There is no voltage fluctuations to speak of at power on, during transmit, receive, or at power off.
It comes with built-in cooling fan and temperature detector. Cooling fan will not run until the inner temperature reaches 113°F (45℃), which makes heat dissipation more efficient.
Compact small size, high efficiency, high reliability and stable performance. Indoor use only!
Kindly Not: Power cord is NOT included. If you need, please buy it by Searching product ASIN B07CWS4BGC on Amazon.
Customers say
Customers find the power supply to work well and provide good value for money. It works well for some applications and runs light strips smoothly. They appreciate its easy installation and voltage adjustment. However, opinions differ on the power supply’s build quality, noise level, and heat dissipation.
AI-generated from the text of customer reviews
13 reviews for ALITOVE DC 24V 15A 360W Power Supply Universal Regulated Switching Transformer Adapter LED Driver 110V/220V AC Input for LED Strip CCTV Radio
Add a review
Related Products
$23.99
Sparkie –
Works great powering COB LED light strips
I bought two of these 24V units to power a decent sized COB LED strip installation in my kitchen. I also bought three 5V units to power a BUNCH of RGBIC LED strips, two hooked up to a switched circuit, and one always on. The 24V units are on a separate switch.So far all of the power supplies in the installation work great, only complaint is that the fans get noisy on the 24V units after the lights have been on for about five minutes.My complaint about the fans really has to do with one of the power supplies which turns its fan on-off-on-off to regulate the temperature of the power supply depending on how heavy the electric load is, while the second one has a smooth speed control on its fan and ramps the speed up or down to keep its temperature controlled. I much prefer the self-adjusted fan that runs at much lower RPMs than the power supply that turns its fan on and off, because that one turns the fan on full-speed and makes much more noise, and brings attention to the fan noise by constantly turning it on and off. Iâm planning to move both of the 24V supplies to a location away from the kitchen so that the fans canât be heard at all.The voltage measures clean on both, and the output is adjustable so you can dial in exactly the voltage you need for the application you are connecting it to. The voltage is well regulated as well.Great little power supplies at an affordable price. Highly recommended.
Michael Shafer –
Nice power supply
This is the 3rd power supply I’ve purchased from them. All three systems are still working with no issues.
Ron –
Iâm a fan of no fan noise!
At the time of writing this review, I have owned the power supply for about a week. This unit is working great for me so far. I used them for powering my COB LED lights using a DigUno board. I previously bought a different brand which had a fan and was extremely loud. I bought this one because it was designed without having a fan. The heat dissipation on this unit seems to do very well. I stuck a thermometer over the coil and it registered about 125 degrees. Other areas of the board were around 85-90 degrees. I placed the unit on top of some metal risers to allow for airflow under the unit as well. Overall, I like the unit so far. Hopefully it will last a long time.
Andrew –
Used to power a 32′ length of high-brightness LED tape
I built a 60″x30″ backlit frameless bathroom mirror using a 32′ length of high-density, very bright LED tape. Just like the ones you see on Amazon. Because of the brightness and number of LEDs, the solution required a 24V DC power supply capable of powering 160W. This was hard to come by, and I found the solution in this 24VDC 10A 240W Power Supply. I just had to connect my own power cord (3-wire hot, neutral and ground) and connect the LEDs to one of three pairs of 24VDC V+/V- terminals. The power outlet feeding the power supply was switched by a regular wall switch. In all, this has turned out to be a great and reliable solution. The output voltage was an accurate 24VDC, but it had a tunable resistor to make small adjustments to the voltage, if necessary. The power supply has no fan but good ventilation with lots of holes in the metal case. I am confident in this power supply because of its safety features like automatic overload cut-off, over-voltage cut-off, automatic thermal cut-off, and short circuit protection. Good value for money.
Quality Matters –
Perfect for LED lights.
Works perfect to power more than 32â of LED COB lights.I do wish it came with a power plug since it is intended to be used with standard 120v.
RonColo –
Stays cool and works well
This unit works really well, converting 120vac to 24vdc and it is quiet, no cooling fan required. The protective cage enclosing the unit does not get hot to the touch. I use it to control two window motors using a momentary dpdt switch.
GieTM –
Boom! Bummer.
I purchased the 24v supply in October 10/24. I didn’t get a chance to use it until last week 12/24. I connected 2-12v 4″ fans and 50′ of WLED 5050 strip lights to my sons computer desk. Got everything all buckled down and nice. Looks nice, got some gentle airflow, everyone is happy.Maybe 30 to 40 min later “KAA-PLUUU-FIEEEE”. Capisitor go boom.No support.Temporary single use power supply.Sad, that things are such low quality these days. Perhaps it’s time to start making my own power supplies again.Youtube it people. You can do it too. Far better for less $ and VERY little effort and skill needed.Sorry, but I demand better for my $.
Jared Bytheway –
So far so good
I’ve been using it for about 3 weeks now and I’ve had no problems. I use it to run a salt water chlorinator for my swimming pool which takes about 5 amps typically. It runs cools. The only problem I see is that the regulation is no super. At 5A, the voltage drops to about 21V. My chlorinator isn’t too picky so it’s ok for my application.
richard –
works well
Andreas Haring –
Wir verwenden das Netzteil als Spanngsversorgung für eine indirekte Beleuchtung und sind sehr zufrieden. Der Lüfter ist überraschend leise und insgesamt ein Netzteil das wir gerne wieder einsetzen
Amazon Customer –
Easy to use unit bought it to power two 16 ft cob light sets. Regulates as needed I have solid power
Alain M. –
Pour un remplacement dans un power amp audio. Fonctionne très bien!
7222ingo –
Schnelle Lieferung eines guten und ruhigen Schaltnetzteils