Aclorol 5V 20A 100W Switching Power Supply 110V / 220V AC to DC 5V 20amp Universal Power Transformer Driver Converter Adaptor for WS2812B WS2813 LED Strip Pixel Lights CCTV Camera Security System
$18.99
Price: $18.99
(as of Jan 09, 2025 12:50:14 UTC – Details)
From the brand
Since 2018, we have focused on series products such as power adapters, LED strips and LED neon signs.
Widely used in indoor and outdoor decoration lighting, which are more energy-saving with longer service life and higher cost performance.
All along, in order to give customers a better product experience, we have been updating and producing new products. May our efforts make you satisfied.
Adjustable Power Adapter
5V Power Supply
12V,24V Power Supply
Universal Power Adapter
Input: 110V/220V AC; Output: DC 5V 20A max. Output voltage can be adjusted 15%. 2 sets of output Channel. ( Indoor use only! )
High-quality raw mateerials- Pure Copper Inductors, High-performance Transformers, Dual-capacity Electrolytic Capacitors is The Guarantee of High-quality 20A 5V Switching Power Supply.
Multiple rprotection – With Over-voltage Protection, Overload Protection, Overheating Protection and Prevent Short Circuit.
Widely used – High quality Switch Power Supply it is perfect for all 5V power supply 60a projects, such as WS2811 2801 WS2812B WS2813 LED Strip Pixel light, CCTV Camera, Security System, Computer Project, etc.
Enough 100W output power and 5V stable output voltage will protect your electronic products from destruction, and there isn’t fan inside the case, silent running. Metal case with many holes makes heat dissipation more efficient.
Customers say
Customers are satisfied with the power supply’s functionality and voltage range. They say it works as expected, has good voltage control, and maintains stable voltage at high amp draws. The product is a great value for the price.
AI-generated from the text of customer reviews
13 reviews for Aclorol 5V 20A 100W Switching Power Supply 110V / 220V AC to DC 5V 20amp Universal Power Transformer Driver Converter Adaptor for WS2812B WS2813 LED Strip Pixel Lights CCTV Camera Security System
Add a review
Related Products
$18.99
Squirtle –
Great longevity
Have had this running for hundreds of hours straight power servo motors on an industrial machine. Zero issues.
Aaron Smith –
Stable voltage at high amp draw.
Powering two light strips and with both at max, drawing 18 amps, the voltage at the power supply was 5.02 volts. Works great!
Christopher Baranski –
A great power supply for a project!
The case isn’t the sturdiest but it gets the job done. Good cover over screw terminals
paulywalter –
It works like it should
Tested the voltage and maintains well. Great value for the price
Jason F. Heath –
5v power supply
LEDs
Paul Richmond –
Bottom line, it works.
This product works as expected and appears to have good voltage control. The only hesitation I have with it is that the Screw terminals are not well labeled. They are in the photographs but the actual product has them laser etched into the sheet metal cover and my old eyes had difficulty reading them. No great problem, a little label tape out of my brother label printer and itâs great.
Steven –
Adjustable and consistent. So far so good
There are really only 2 things that matter with these kinds of power supplies. Volts and Watts. Volts look good and can be adjusted to both sides of the 5V target so if you have long or short power lines you can make sure your device is getting the necessary currents. Voltage range of 4.48v to 6.72v with the adjustment screw on the unit.I’m using this to power a Raspberry Pi so the max current draw is only 3amps but it’s working great. Performance may be different at the full 20amp capacity but it looks good so far.
Kurt E –
Strong 5v power supply
Hooked right up and runs my lights and arduino without issue. It will need to power my 1000 5v leds. I had them hooked up to 150 leds for testing and no issues encountered. The one thing is the numbers are embossed not with removable labels.
le bidouilleur techno –
J’ai dû le recommander à 2 reprises car le premier que j’avais reçu avait été endommagé. Le 2nd fonctionne très bien, très bon produit.
nomad –
great item for low prize .
stanley chigova –
Looks good. Works for what I needed it for.
Mike –
Itâs a power sauceNo, itâs a source of power
Alepage –
The input voltage switch is inside the cover, and there is a sticker saying “Don’t open the cover”. Fortunately I could see the switch through the cover holes and it was set to the correct input voltage.There is a POT to adjust the output voltage. I set to 5V and then started adding load. My PLC ran OK until I connected an LED strip, then my PLC smoked. I think the voltage jumped. I would not recommend connecting directly to digital circuits. It needs a voltage regulator.The power supply is lightweight and easy to connect AC cord and DC wires. 20A can drive a lot of LEDs.