Lian Li A3-mATX-26.3L Micro Form Factor Chassis-Flexible Power Supply Installation-No Fans Included-Supports 360mm AIO-Modularity Design-For M-ATX and ITX Motherboard-DAN Collaboration-Black (‎A3X.US)

11-Liter SFF Hall of Famer
This case is absolutely amazing, punching well above its weight class. Let’s start off with what I have inside mine — an i7 12700K and am RTX 3090 TUF, powered by a Cooler Master V850 SFX PSU. Man, does this case make it happen.The H2O is able to handle this kind of power because the CPU is liquid-cooled, and the GPU sits on the other side of this sandwich style case. The case itself is rock solid, utilizing a near tool-less snap-together design and plenty of ventilation for its size. It is larger than the previous model (Dan A4 SFX), due to the intention of this being water-cooled.I opted for an MSI CoreLiquid 240R ARGB V2, since the water block is small and offers ARGB. It tames the temps well on my 12700K. You’ll need to make sure your AIO will fit in this case, as there are many that won’t — either because the pump/water block is too tall or because the hoses are too thick. You’ll also want something that has hoses on swivel elbows. Otherwise, routing the hoses and closing this case will be next to impossible. This was hands-down the hardest aspect of building in this case — managing the AIO hoses.The A4-H2O gets a lot right. You can cool some higher end CPUs, use a full length GPU, and a semi-pleasant building experience. To top it off, it looks amazing, and the parts are high quality. Just keep your hands off the case, as the finish shows off fingerprints well.This case is an excellent competitor for the NR200, because it’s 8 liters smaller, and has nearly all-metal construction. To me this one is the obvious choice. Also in this form factor I would avoid i9 CPUs entirely. They eat up too much power, and make too much heat.My experience with this case has been fantastic, but it did leave me wanting more. Having a liquid-cooled, 11.24-liter PC means it’s going to be a tad heavy. It’s also too big to fit into my DSLR camera bag. I also think this case’s width dimension would be a tight fit in a carry on-size tough case like one from Pelican.If you need a small form factor PC for saving desk space, this is an excellent option. That’s the niche this serves for me, and it delivers. Maybe you can make this a portable powerhouse for more than gaming. Its too big and heavy for me. Personally, I’ve found my 8.1-liter KXRORS S300 case to be a better road warrior, because it fits in my DSLR bag and weighs less. Sure, that one can’t be as powerful, but it games very well, albeit a little louder.

Great case, tricky planning and build
The main gimmick of this case is the ability to mount psu at different heights depending on your needs, if you want watercooling you’ll need to place it lower for more room at top, want a long gpu place it higher to increase clearance upto over 400mm, want both you’ll need a sfx psu which is easier to cable manage anyway, want a thick gpu, upto 4 slots but anything thicker than 2 you won’t be able to have bottom fans or drivesPros.Compatible with fullsize componentsLooks nice(imo)Easy front panel connectorRelatively compactOutstanding build qualityAffordableCons.Horrible cable management optionsScrews come mixed in bagLimited compatibility(may not match the maximum listed dimensions)Parts used in my buildGPU: 7900gre hellhoundPSU: Toughpower gf3 1000wCPU: ryzen 7 7800x3dMotherboard: mag b650m mortar wifiCpu cooler: deepcool assasin IV(may be unavailable due to recent ban, I bought it a while before I learned of the Russia issue)Fans: artic 120mm 5 pack, I could only fit 3 with my gpu blocking the bottom 2Would definetly reccomend to experienced builders or anyone willing to do the research on each components compatibility(or want to take the gamble)Edit: it’s also important to mention that come cpu coolers like mine will prevent you from installing the side fan bar, whcih means even tho there is room between my cpu cooler and psu for a fan I can’t put one there since the part the fan attaches to is blocked, because of that I could only fit 3 fans, 2 on the top and 1 in back, all exhaust unfortunately whcih means it’s a negative pressure system, air can get in through the sides but this will lead to some dust build up

Good airflow and easy to build in. Love the wood front panel.

Honestamente el acabado es buenísimo, lo mejor es el tamaño y como está construido para el flujo de aire, SI ES DIFÍCIL PARA ARMAR, mas si tienes un AM4 el diaipador es difícil de poner con los cables tan pegados, NO ES UN GABINETE PARA PRIMER ARMADO, pero es ligero, bonito y chico, si vale mas de 4000, seguramente no lo compraria.recomendación, en sus armados busque tener cables suaves de tela o personalizados, los de plásticos son duros y dificulta bastante más el armado, debe ser un factor a considerar el uso de cables en este gabinete