Thermaltake Versa H21 SPCC ATX Mid Tower Computer Chassis CA-1B2-00M1NN-00,Black

Easy to use and plenty of space.
Found this case by accident. The price was right and it has plenty of slots for expansion drives and ample space for any size motherboard. It is a cheaper example of the Corsair 200R – not quite as wide, but the same general layout for drives. Another difference is that the Corsair is all powder coated metal, this one is metal framed but plastic hardware for holding drives. Nevertheless, unless you are going to open her up and play under the hood more than a couple times a year, some of the plastic parts could break. Otherwise, this is a great basic case – not much for gaming as none of your gear is visible because it’s a solid case. For us, it works great and $43 was more than fair.

A Well-Designed Budget Case
I’ve been building computers for many years, and though I’ve never gone for the really expensive cases, I have purchased a range of enclosures; this Thermaltake case is by far the best budget case I’ve come across. The design is well thought out, from the HDD and SSD trays to the easy-access fan mounts at the front of the case. Fit and finish were much better than I anticipated at this price point; so often the budget cases have motherboard mounting holes that don’t line up, etc., so this case was a pleasant, easy installation experience. It’s also well-vented, though not on the side panel, but I don’t believe it would make a lot of difference considering how open the front is. Overall, for the price, I can absolutely recommend this case for those who need a functional, well-ventilated computer build. If you’re looking for something fancier, there are lots of other options, though you’ll spend a good deal more.

Great case for the money, lots of nice options
I was pretty happy with this case overall. It was a bit of a tight fit stepping down from a full tower Lian Li case that I was previously using but managed to get all the components to fit after a bit of trial and error. A couple of things to note. The drive bays are a little strange but actually kind of cool once you get used to them.The drives will “snap” into the carriers, thing is you actually put them in so the sata connectors are towards the back of the case. If you put them in toward the front the cables won’t fit properly under the side cover as there is very little space there once that cover is on. However it is easy enough to just feed them through the case to the back and you’ve got a lot more room to work with. Makes for good cable management I guess but it was a bit unexpected so I was scratching my head for a minute or two.This will mount 2 120mm fans up front, on in the rear and two up top of standard size which is a lot of airflow. My setup is a bit different, my CPU uses a water cooling rig with a single 120mm radiator so I mounted that out the back, relocated the 120 mm fan that was there to the top (only room for one in this case, you can’t really mount the second fan as the radiator is just a touch too big to allow the fan to go in up top, then I mounted two 120mm fans up front. Works very well, keeps the system quite cool and I’m very happy with thermal management.Hard drive bays are nice, you’ve got room for 3 x 5.25 and the covers for those slots can be removed and then replaced if you decide to change your setup which is very nice, they just snap in. Internally you have 3 2.5 bays which work great for SSD drives and 3 3.5 inch bays that I used for some 8tb sata drives for a good amount of storage.I did add a fan controller, having all those fans running full blast was a bit noisy and I liked being able to turn them down a bit to quiet the system a tad. But all in all it’s a good little case, I liked it because it is just low key and doesn’t have all that silly acrylic side panel look at all the LED lights like a lot of other mid tower cases have. I know people love those for gaming rigs but I’m building a computer, not a landing strip for aircraft.. lol.I would purchase this again, for the money it’s pretty hard to beat for mid tower cases. I did give it 4 out of 5 stars due to the lack of well written documentation, getting this together was more trial and error than anything else, and the location of the 120mm fan exhaust port on the rear, if they had just moved that down a centimeter or two I would have had room for another fan. I don’t need it for cooling you understand up top but it’s an OCD thing, I’ve got one slot with a fan and one without which just looks a little off. But other than that, great case.

I have just returned after a long term overseas contract and to save weight I left my Thermaltake Elements G case behind and just bought the mobo home to make a storage PC.The case is so cheap I thought I had been sent a Chinese no-brand case. Flimsy metal, cheap plastic HDD trays when we should be moving away from such materials, once you remove the rear close-outs and the 5.25 optical bay closures – you will never get them to fit back in as the tin foil metal bends irreparably. Also the numerous sharp edges from breaking out said closures cut your hand with annoying regularity.God how I wish I had bought mt Elements G case home – it was everything that this one is not. Buy a different brand as Thermaltake are no longer a quality manufacturer. If I could give this 0 stars, I would.

لايصلح لاستخدام المحترفين

Very good case, one of the few I could find which had space for two front mounted 120mm fans with a bottom mount power supply design. I wanted two intake fans to help ensure there is plenty of airflow since my CPU is liquid cooled, and this case makes that not just possible, but downright convenient. The cable management area is great because it gives you plenty of options for where you want a cable to enter or exit, and nothing is arranged awkwardly or blocking the airflow with my setup as a result.